IP 710 Manual 5
Note: * Indicates a normal operating mode key feature, which is
available only after registering the IP 710 with the phone server
and logged in as an extension.
16 Release Releases a call, exits from the menu, releases phone
from an active state.
17 Redial* Redials up to last 16 calls and up to 32 digits.
18 SpeedDial* Displays a list of Station Speed Dial entries
configured through AltiView/AltiAgent or
AltiAdmin/ACM Admin. To make an outgoing call,
use the / buttons to select a Speed Dial entry,
then press Enter.
19 Call Log* Displays the caller IDs of up to 99 incoming calls.
To dial, use the / buttons to select a call log
entry, then press Enter.
20 Flash* For system feature codes that need a flash to
complete.
21 Transfer* Transfers a call.
22 Volume Adjusts volume of ringer, speaker, handset and
headset.
23 Dial Pad Functions like a dial pad on a traditional telephone
and is also used for inputting some settings that are
accessed through the phone’s menu.
To Next Page
Loading...
