Alto-Shaam 300-s

56 pages

To Next Page

W164 N9221 Water Street • P.O. Box 450

Menomonee Falls, Wisconsin 53052-0450 U.S.A.

PHONE: 262.251.3800 • 800.558.8744 U.S.A. / CANADA

FAX:

262.251.7067 • 800.329.8744 U.S.A. ONLY

www.alto-shaam.com

Consult instructions

for operation and use.

MN-29423 (Rev. 6) • 02/18

Printed in U.S.A.

Hot Food Holding Cabinet

Deluxe or Simple Control

300S

500S

750S

1000S

1200S

1000UP

1200UP

1200-UP

1000-UP

750-S

500-S

1200-S

1000-S

300-S

• Installation

• Operation

• Maintenance

Main Page

Other manuals for Alto-Shaam 300-s

Installation, Operation And Maintanance Manual52 pages

Questions and Answers:

M
Mark FletcherSep 12, 2025
What does error e-90 mean on Alto-Shaam Food Warmer?
- J
  Jack DownsSep 12, 2025
  Error e-90 indicates that a button has been held down for more than 60 seconds. Adjust the control. The error will reset once you resolve the issue.
Y
yreevesSep 12, 2025
What does error e-60 mean on my Alto-Shaam Food Warmer?
- J
  Jonathan HicksSep 12, 2025
  Error e-60 indicates that the data set has been set to factory default. If applicable, make sure that the date and time are correct.
J
Jennifer DavisSep 9, 2025
What to do if my Alto-Shaam Food Warmer displays error e-79?
- N
  Nicole RiceSep 9, 2025
  Error e-79 means the voltage is over 135 VAC on a 125 VAC unit, or over 250 VAC on a 208-240 VAC unit. You should correct the voltage.
T
Thomas ClarkSep 8, 2025
Why is my Alto-Shaam Food Warmer showing error e-78?
- C
  Carly CarrSep 8, 2025
  Error code e-78 indicates that the voltage is below 90 VAC on a 125 VAC unit or below 190 VAC on a 208-240 VAC unit. To resolve this, correct the voltage.
L
Luke RobertsSep 7, 2025
What does E-70 error mean on Alto-Shaam Commercial Food Equipment?
- P
  Pedro CamachoSep 7, 2025
  If your Alto-Shaam Commercial Food Equipment displays error code E-70, which indicates a configuration connector error (DIP switch), refer to the wiring diagram for your specific model. Ensure the DIP switches on the control match the settings outlined in the wiring diagram.
A
allisonseanAug 23, 2025
What to do if Alto-Shaam Commercial Food Equipment displays E-78 error?
- O
  Oscar KellyAug 23, 2025
  If your Alto-Shaam Commercial Food Equipment displays error code E-78, it indicates low voltage. The solution is to correct the voltage.
R
Regina WilliamsSep 5, 2025
How to fix E-11 error on Alto-Shaam Commercial Food Equipment?
- S
  Susan CohenSep 5, 2025
  If your Alto-Shaam Commercial Food Equipment displays error code E-11, this indicates the cavity air sensor is open. Verify the sensor integrity.
S
Susan WiseSep 4, 2025
What does E-10 error mean on Alto-Shaam Commercial Food Equipment?
- H
  Henry GillespieSep 4, 2025
  If your Alto-Shaam Commercial Food Equipment displays error code E-10, it means the cavity air sensor is shorted. Verify the sensor integrity.
M
millerdavidSep 3, 2025
How to troubleshoot E-21 error on Alto-Shaam 300-s Commercial Food Equipment?
- C
  Christine ClarkSep 3, 2025
  If your Alto-Shaam Commercial Food Equipment displays error E-21, it indicates the product probe is open. Verify the sensor integrity.
R
Ronald HoffmanSep 2, 2025
What does error E-20 mean on Alto-Shaam 300-s?
- S
  Sheila BaileySep 2, 2025
  If your Alto-Shaam Commercial Food Equipment displays error E-20, it indicates the product probe is shorted. Verify the sensor integrity.