Pg. 8. 767-SK, 1767-SK INSTALLATION/OPERATION/SERVICE MANUAL
DRIP TRAY INSTALLATION INSTRUCTIONS
S I T E I N S T A L L A T I O N
I N S T A L L A T I O N
W A R N I N G
FAILURE TO PROPERLY INSTALL THE
DRIP TRAY CAN OR WILL CAUSE
MAJOR EQUIPMENT DAMAGE AND
WILL RESULT IN A LEAKAGE
HAZARD THAT CAN CAUSE
PERSONAL INJURY.
Item Description Qty
1 Double-Sided Tape 1
2 Drip Tray Holder 1
3 8-32 x 1/4" Phil Screw 3
4 Drip Tray 1
1. Poke holes through double-sided tape which is attached to the back of drip tray holder .
2. Remove backing on double-sided tape .
3. Put screws through holes and attach drip tray holder to unit.
4. Optional - apply a line of food-grade silicone caulk along top edge of drip tray holder to seal.
5. Place drip tray in drip tray holder .
To Next Page
Loading...
