INSTALLATION
Vecto r H® S eries ▪ Operat or’s M anual ▪ M N-46 2 95 ▪ Rev 6 ▪ 1/22
47
How to Install the Oven on a Stand
(VMC-H2HW, VMC-H3HW)
Before you begin Make sure you have:
▪ The appropriate stand for your oven
▪ Regulation UL 197, 91.8
▪ An appropriate lifting device, and enough personnel, to safely move and position
the weight of the oven.
□ VMC-H2HW: 243 lb (110 kg)
□ VMC-H3HW: 312 lb (142 kg)
Procedure To install the ovens on a stand, do the following.
Step Action
1. Locate the front of the top panel.
2. Put the top upside down on a flat surface.
Continued on next page
To Next Page
