Alto Elvis Series User Manual

-. For Active Subwoofer & Satellite Speakers
1). Connect one side of signal cable at your audio mixer in to Output Left /Right (with Stereo-Jack or XLR) and the other
side of the cable in to the Left / Mono Input (COMBO) of the active subwoofer; with the second signal cable connect
the Left Output of the subwoofer (Stereo/Mono-Jack or XLR) to the Line Input (COMBO) of the active satellite (with
Stereo - Jack or XLR).
6
Tripod
Mount
Tripod
Mount
Left
Main Mix
Output
Right
Main Mix
Output
QUICK START
Elvis Active Subwoofer & Satellite Speakers
Signal Cable
Signal Cable
Power Cord
3). Turn on your mixer first, then the active speaker cabinets.
2). Connect the power cord to mains.
5). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the
output level.
4). Turn up the volume control fo the active speaker cabinets.
6). After using, turn off your active speaker cabinets first, then the mixer.

Alto Elvis Series Specifications

General

Brand	Alto
Model	Elvis Series
Category	Speakers
Language	English