Alto MAC 2.2 Owner's Manual

BRIDGE MODE
HOOK
UP
The stereo or mono signal input to channel 1 and channel 2 is combined on the BRIDGE
MONO connector. Only channel 1 Gain control is active. The power at the output will
be combined power of the two channels.
The Main Mix signal is routed into an electronic crossover. channel 1 drives the woofer
and channel 2 drives the high frequency driver in a 2-way enclosure.
STEREO BIAMP
HOOK
UP
4
POWER
ON
OFF
MAC 2.4
StereoPower Amplifier
LTO
R
CLIP
SIG
PROT
POWER
CH1 CH2
POWER
ON
OFF
MAC 2.4
StereoPower Amplifier
LTO
R
CLIP
SIG
PROT
POWER
CH1 CH2
POWER
ON
OFF
MAC 2.4
StereoPower Amplifier
LTO
R
CLIP
SIG
PROT
POWER
CH1 CH2

Alto MAC 2.2 Specifications

General

Brand	Alto
Model	MAC 2.2
Category	Amplifier
Language	English