Amada vm1200 - Changing Fluid and Oil; Cutting Fluid; Hydraulic Oil

V
-6
CHANGING FLUID AND OIL
C
utting fluid
The cutting fluid will be discolored by the contaminants and rust of the
workpieces and will be degraded and subject to bacterial growth when
used for a long period of time.
At least once per year, especially before the summer vacation, change
the entire cutting fluid. At the same time as the fluid change, clean the
cutting fluid tank and pan.
Tank capacity: 105 L {27.7 US gal}
NOTE
O Dispose of the used cutting fluid as specified by the manufacturer and by the
applicable government regulations in your country.
Hydraulic oil
Change the hydraulic oil every six months of machine operation.
Change the entire hydraulic oil despite any additions made in the
process. At the same time as the oil change, clean the hydraulic tank
and suction filter.
Recommended hydraulic oils: Esso Teresso 32
Mobil DTE 24
Shell Tellus Oil 32
(ISO VG32 equivalent)
Tank capacity: 10 L {2.6 US gal}
NOTE
O Dispose of the used hydraulic oil as specified by the manufacturer and by the
applicable government regulations in your country.