Amada vm1200 - Page 28

I-8
VM1200 VM2500
Tank capacity,
L {US gal}
105 {27.7}
Cutting fluid
Pump Centrifugal immersion type
Tank capacity,
L {US gal}
10 {2.6}
Pump
capacity
11 L/min {2.9 US gal/min} at 50 Hz
Hydraulic
unit
Set pressure 3.5 MPa {508 psi}
Saw blade
motor
5.5 kW {7.38 HP}, 4P, 200 V, 50/60 Hz
Hydraulic
pump motor
0.75 kW {1.01 HP}, 4P, 200 V, 50/60 Hz
Cutting fluid
pump motor
0.18 kW {0.24 HP}, 2P, 200 V, 50/60 Hz
Table feed
motor
0.5 kW {0.67 HP}, 200 V, 50/60 Hz
Motors
Wire brush
motor
0.09 kW {0.12 HP}, 4P, 200 V, 50/60 Hz
Chip disposal Use accessory chip rake and chip shovel.
Control circuit voltage AC 100 V, DC 24 V
Width,
mm {in.}
1702 {67.0}
Length,
mm {in.}
3263 {128.5} 5863 {230.8}
Machine
dimensions
Height,
mm {in.}
2450 {96.5}
Machine mass, kg {lb} 3300 {7277} 5500 {12128}