-2-
CAUTION
DO NOT TOUCH LED
Light Source Surface
8. Let the lighting fixture cool completely before storing.
9. To reduce the risk of electric shock, do not immerse this fixture
in water or any other liquids.
10. To reduce the risk of fire or electric shock, do not disassemble
this fixture. Contact cs@aputure. com or take it to qualified
service personnel when service or repair work is required.
Incorrect reassembly may cause electric shock when the
lighting fixture is in use.
11. The use of an accessory attachment not recommended by the
manufacturer may increase the risk of fire, electric shock, or
injury to any persons operating the fixture.
12. Power this fixture by connecting it to a grounded outlet.
13. Please remove the protective cover before powering on the
light.
14. Please remove the protection cover before using the reflector.
15. Please do not block the ventilation and do not
look at the light directly when it is powered on.
16. Please do not place the LED lighting fixture near
any liquids or other flammable objects.
17. Only use a dry microfiber cloth to clean the product.
18. Please have the product checked by an authorized service
personnel agent if your product has a problem.
19. The malfunctions caused by unauthorized disassembly are not
covered under the warranty.
20. We recommend only using the original Aputure cable
accessories. Please note that our warranty for this product does
not apply to any repairs required due to any malfunctions of
unauthorized Aputure accessories, although you may request
such repairs for a fee.
To Next Page
Loading...
