Pace alert
When you are running, if the watch detects that your pace is slower than the one you set, it will
vibrate and display the alert on the screen.
How to setup: Outdoor running > Workout settings > Workout reminder > Pace, choose a pace and
turn on or off your pace alert.
Auto pause
The auto-pause can be turned on or off in the auto-pause settings. Once it is turned on, whenever
the exercise speed is too slow, the workout recording will be paused automatically. When the
speed increases beyond a certain threshold, the workout recording will resume. Recording can also
be resumed manually during the pause.
Real-time graph
In the real-time diagram settings, you can set if a real-time data plot should be displayed during
workout. The plot for each workout can be different, so one real-time plot using one set of data
can be set up for each workout.
About GPS Positioning
When you enter the Workout Preparation page for an outdoor exercise such as running, the watch
will automatically start GPS positioning and alert you as soon as your location is confirmed. The
watch will turn off GPS positioning automatically when you exit the Workout Preparation page or
finish the workout.
The GPS searching process will last for 5 minutes maximum. If positioning is not successful after
that, you will be prompted to repeat the positioning process. If you do not start exercising within
10 minutes after you are successfully positioned, the watch will automatically turn off positioning
to reduce power consumption. You will have to repeat the positioning process if you want to start
exercising again.
Positioning tips:
GPS positioning should be performed in an open area outdoors. Please wait for the positioning
process to complete before starting your exercise. If you are in a crowd, raising your watch to your
chest level may speed up the positioning process.
Assisted Global Positioning System (AGPS):
AGPS uses the orbital information of the GPS satellites help the watch perform GPS positioning
faster.
When the watch is connected with your phone via Bluetooth, the watch will actively synchronize
and update AGPS data with Amazfit app every day. If the watch hasn’t synchronized this data with
Amazfit app for seven consecutive days, the AGPS data will expire, and the positioning speed
may be affected.
Pool Swimming
Useful terms
Lane length: The length of the lanes in your swimming pool. The watch will calculate your
swimming data based on the lane length you set.
Therefore, every time you change a swimming pool, please set the lane length accordingly so that
the watch can accurately assess your swimming data.
Lap: under the pool swimming mode, swim for a distance equal to the lane length you set.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
