6
Setup
Your speaker is partially charged when it arrives so you can
use it right away. For the best reception, keep the speaker
within 30 feet of the device it’s paired to.
Pairing the speaker and a device
1. Turn ON your speaker. A tone sounds, the LED blinks
quickly, and your speaker enters pairing mode.
Note: If you do not hear a tone and the LED doesn’t blink
quickly, press and hold the function
button for 1 to 3
seconds to put your speaker in pairing mode. A tone sounds
and the LED blinks quickly.
2. Turn ON your device (like a phone or tablet).
3. On your device, locate your Bluetooth settings and turn on
Bluetooth.
To Next Page
Loading...
