Amazon Echo SK705DI User Manual

2: Download the Device app
www.XXXXXX.com/start
The app enables you to set up and
manage the Device on your
phone or tablet. Opening the app
will immediately start the setup
process. During setup, you will
connect Device to the Internet.
You may need your Wi-Fi
password.
1. Plug in Device
Plug the included power cable into
Device and then into a power
outlet. A blue light ring will begin
to spin around the top. In about a
minute, the light ring will change
to
orange and the Device will
greet you.
User's Guide for
FCC ID: ZWJ-0823 &
FCC
ID: 2ACBD-0610

Amazon Echo SK705DI Specifications

General

Product Type	Smart speaker
Model Number	SK705DI
Voice Assistant	Amazon Alexa
Connectivity	Wi-Fi, Bluetooth
Color	Charcoal

Summary

Initial Device Setup

Plug in Device

Connect the device to a power outlet and observe the light ring behavior during startup.

Download Device App

Install and open the companion app to manage your device and start the setup process.

Device Components Overview

Control Buttons and Rings

Details on the action button, microphone on/off button, volume ring, and light ring functions.

Power LED Indicator

Identifies the small white light that indicates when the device is plugged in.

Regulatory and Compliance Information

FCC Compliance Statement

Information on FCC rules, interference guidelines, and user responsibilities for compliance.

RF Exposure Guidelines

Details on radio frequency energy emission limits and recommended safe operating distances.

Device Remote Operation

Remote Control Functions

Overview of buttons on the remote for voice interaction, volume, and playback control.

Remote Battery Information

Notes the use of AAA batteries for the remote control.

Remote Pairing and Mounting

Pairing the Remote

Instructions for automatic pairing during setup and manual pairing for replacement remotes.

Remote Holder Usage

Guidance on attaching the remote holder to magnetic or other surfaces.