Ambient Weather WS-1171

Questions and Answers

E
emolinaAug 13, 2025
What to do if the wireless remote is not reporting to the Ambient Weather Station console?
- D
  derrickgonzalezAug 13, 2025
  If your Ambient Weather Station's remote thermo-hygrometer isn't reporting to the console (indicated by dashes on the display), try these steps: Ensure the sensor is within the 300’ line of sight range. If too close (less than 10’), move it further away. Cycle power on the console. Replace the remote thermo-hygrometer batteries with a fresh set; use lithium batteries in cold environments. Confirm the sensor isn't transmitting through metal or earth barriers. Also, move the console away from electrical devices and try relocating the remote sensor to a higher or closer position. Remember that RF sensors can't transmit through metal or thick walls.
E
egriffinAug 16, 2025
How to fix Ambient Weather Station temperature sensor reading too high?
- E
  Elizabeth SmithAug 16, 2025
  To prevent inaccurate high-temperature readings during the day with your Ambient Weather Station, ensure the thermo-hygrometer is mounted in a shaded area on a north-facing wall. If this isn't possible, consider using a radiation shield.
J
Juan HarrellAug 20, 2025
Why does the relative pressure on my Ambient Weather Station not agree with official reports?
- A
  Amy Navarro DVMAug 20, 2025
  If the relative pressure on your Ambient Weather Station doesn't match an official reporting station, ensure you've selected relative pressure and not absolute pressure. Calibrate the sensor against an official local weather station. Note that the barometer's accuracy is ± 0.08 inHg within an absolute pressure range of 27.13 to 32.50 inHg, corresponding to an altitude of -2,200 to 2,700 feet. Expect potential errors at higher altitudes.
W
William SimsAug 25, 2025
Why don't the indoor and outdoor temperatures agree on my Ambient Weather Station?
- H
  Harry RamirezAug 25, 2025
  If the indoor and outdoor temperatures on your Ambient Weather Station don't match, allow up to one hour for the sensors to stabilize due to signal filtering. The indoor and outdoor temperature sensors should agree within 4 °F (the sensor accuracy is ± 2 °F).
A
Alyssa PerryAug 28, 2025
Why is there a difference between indoor and outdoor humidity on my Ambient Weather Station?
- K
  Kevin FrostAug 28, 2025
  If the indoor and outdoor humidity readings on your Ambient Weather Station are inconsistent, allow up to one hour for the sensors to stabilize due to signal filtering. The indoor and outdoor humidity sensors should agree within 10 % (the sensor accuracy is ± 5 %).
E
Ebony EricksonAug 31, 2025
Why is the Ambient Weather Station forecast icon not accurate?
- J
  jacqueline99Aug 31, 2025
  The weather forecast on your Ambient Weather Station is an estimation of weather changes in the next 24 to 48 hours and varies by location. The console needs to run for several days to trend barometric pressure. It should be considered a tool for projecting weather conditions, not a completely accurate prediction method.
L
lcookSep 4, 2025
Why don't the console outdoor humidity and remote humidity agree on my Ambient Weather Station?
- B
  Brian BrewerSep 4, 2025
  The console displays the calibrated humidity, while the remote displays the measured humidity only. Refer to section 4.2.2 to set and reset the humidity calibration on your Ambient Weather Station.
T
Thomas MartinezSep 7, 2025
How to fix weak display contrast on Ambient Weather Station console?
- G
  Gloria WilsonSep 8, 2025
  If the display console contrast on your Ambient Weather Station is weak, replace the console batteries with a fresh set.

Summary

Getting Started

2.1 Parts List

Lists the components included with the weather station, such as the display console and remote sensor.

2.2 Recommend Tools

Lists the necessary tools for installation, like a Philips screwdriver and drill.

2.3 Thermo-Hygrometer Sensor Set Up

Provides instructions for installing batteries and setting up the outdoor thermo-hygrometer sensor.

2.4 Display Console Set Up

Details the process of setting up the main display console, including battery installation and initial placement.

Remote Sensor Installation

Console Operation

4.1 Quick Display Mode

Explains how to navigate and view different outdoor readings in the Quick Display Mode.

4.2 Set (Program) Mode

Guides users through setting various console parameters like DST, time zone, and date.

4.3 Alarm Mode

Covers entering and configuring high and low alarm settings for various weather parameters.

4.4 Min;Max Mode

Allows users to view and reset maximum and minimum recorded weather data.

4.5 Other Console Features

Describes additional functionalities of the console, including weather forecasting and icons.

Glossary of Terms

Specifications

6.1 Wireless Specifications

Details the wireless transmission range, frequency, and update rate of the weather station.

6.2 Measurement Specifications

Provides accuracy and resolution details for measured parameters like temperature, humidity, and pressure.

6.3 Power Consumption

Outlines the battery requirements and expected battery life for the base station and remote sensor.

Troubleshooting Guide

Accessories

Liability Disclaimer

FCC Statement

Warranty Information

Ambient Weather WS-1171 Specifications

General

Type	Wireless Weather Station
Display	LCD
Update Rate	Every 16 seconds
Outdoor Sensor Power	2 x AA batteries (not included)
Wireless Frequency	433 MHz
Power Source (Outdoor Sensor)	2 x AA batteries (not included)
Indoor Temperature Range	32°F to 122°F (0°C to 50°C)
Humidity Range	10% to 99%
Display Console Power	3 x AA batteries (not included) or AC adapter
Power Source (Display Console)	3 x AA batteries (not included) or AC adapter