To Next PageTo Next Page
Need help?Do you have a question about the Ambient Weather WS-100 and is the answer not in the manual?
Lists all components included with the weather station system.
Lists essential tools for setup and installation.
Covers the assembly and installation of the anemometer.
Details the assembly and installation of the rain gauge.
Explains assembly and installation for the thermo-hygrometer.
Covers assembly and placement of the pool thermometer.
Details assembly, mounting, and installation of the probed thermometer.
Covers assembly, operation, and installation of the indoor sensor.
Essential checks before beginning the installation process.
Guidance on evaluating the optimal location for installation.
Tips for ensuring reliable wireless signal transmission.
Identifies and explains the function of module buttons and indicator lights.
Step-by-step instructions for powering up the WS-100 module.
Details the module's Wi-Fi connectivity and data services.
Instructions for connecting the module to a Wi-Fi network.
Guide to accessing the module's web-based configuration.
How to view real-time sensor data on the interface.
Procedures for calibrating sensor measurements for accuracy.
Steps to adjust temperature readings.
Steps to adjust humidity readings.
How to calibrate wind speed measurements.
Instructions for updating device firmware.
Details on wireless transmission range and frequency.
Accuracy and resolution for measured parameters.
Routine cleaning and battery replacement guidance.
Compliance information regarding FCC rules.
Details of the product's limited warranty coverage.
Information regarding California Proposition 65 warnings.
Lists all components included with the weather station system.
Lists essential tools for setup and installation.
Covers the assembly and installation of the anemometer.
Details the assembly and installation of the rain gauge.
Explains assembly and installation for the thermo-hygrometer.
Covers assembly and placement of the pool thermometer.
Details assembly, mounting, and installation of the probed thermometer.
Covers assembly, operation, and installation of the indoor sensor.
Essential checks before beginning the installation process.
Guidance on evaluating the optimal location for installation.
Tips for ensuring reliable wireless signal transmission.
Identifies and explains the function of module buttons and indicator lights.
Step-by-step instructions for powering up the WS-100 module.
Details the module's Wi-Fi connectivity and data services.
Instructions for connecting the module to a Wi-Fi network.
Guide to accessing the module's web-based configuration.
How to view real-time sensor data on the interface.
Procedures for calibrating sensor measurements for accuracy.
Steps to adjust temperature readings.
Steps to adjust humidity readings.
How to calibrate wind speed measurements.
Instructions for updating device firmware.
Details on wireless transmission range and frequency.
Accuracy and resolution for measured parameters.
Routine cleaning and battery replacement guidance.
Compliance information regarding FCC rules.
Details of the product's limited warranty coverage.
Information regarding California Proposition 65 warnings.
General| Display Type | LCD |
|---|---|
| Update Rate | Every 16 seconds |
| Rainfall Range | 0 to 393.7 inches (0 to 9999 mm) |
| Wind Direction | 0° to 360° |
| Power (Remote Sensor) | 2 x AA batteries (not included) |
| Transmission Frequency | 915 MHz |
| Wireless Range | 300 ft |
| Outdoor Temperature Range | -40°F to 140°F (-40°C to 60°C) |
| Indoor Humidity Range | 10% to 99% |
| Outdoor Humidity Range | 10% to 99% |
| Wind Speed Range | 0 to 99 mph |
| Display Power Source | Batteries |
| Power Source | Batteries |
| Update Interval | Every 60 seconds |
| Indoor Temperature Range | 32°F to 122°F |
