Name: Ambient Weather WS-100
Brand: Ambient Weather
Rating: 4 (1 reviews)

To Next Page

To Previous Page

digital thermometers are not a good source and have their own margin of error.

Place the sensor in a shaded, controlled environment next to the fluid thermometer, and allow the sensor to

stabilize for 48 hours. Compare this temperature to the fluid thermometer and adjust the module to match the

fluid thermometer.

6.6.6 Indoor Sensor Installation

Indoor use only. It is recommended you mount the Indoor sensor in a shaded area. Avoid indirect

sunlight and radiant heat sources that will result in inaccurate temperature readings. Use a screw or

nail (not included) to affix the indoor sensor to the wall, as shown in Figure 46.

Figure 46

To place on a table or horizontal surface, fold out the desk stand, as shown in Figure 47.

Questions and Answers:

Need help?

Do you have a question about the Ambient Weather WS-100 and is the answer not in the manual?

Ambient Weather WS-100 Specifications

General