Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 7
Figure 6
4 Console Operation
Note: The console has four buttons for easy operation: MIN/MAX/- button, CLEAR/ADJUST
button, CHANNEL/+ button and LIGHT button.
4.1 Min/Max Mode
The Min/Max mode displays the minimum and maximum temperature and humidity (since reset of the
unit) for the indoor, remote channel 1 through 8 sensors.
Prior to entering the MIN/MAX mode, press the CHANNEL/+ button to select the temperature and
humidity values you wish to view.
1. Display Maximum. Press the MIN/MAX button once to display the maximum. The MAX
icon will be displayed.
2. Clear Maximum. To reset the maximum values to the current values, press and hold the
CLEAR button for 3 seconds.
3. Display Minimum. Press the MIN/MAX button again to display the minimum. The MIN
icon will be displayed.
4. Clear Minimum. To reset the minimum values to the current values, press and hold the
CLEAR button for 3 seconds.
To return to normal mode, press the MIN/MAX button again.
4.2 Clearing Min/Max Daily
The minimum and maximum can be set to clear every 24 hours automatically. Press and hold the
CLEAR/ADJUST button for 3 seconds to switch between Clears 24h and Clears Manually.
When you manually clear the minimum and maximum, the Clears 24h function will clear every 24
hours from the time you clear it.
For example, if you clear the min and max at 4:00pm, it will continue to clear every day at 4:00pm.
To Next Page
Loading...
Need help?
General
