16
soft
turbo
30
31
turbo
soft
2929
If the indicator has left the firstsoft or turbo
window (depending on cooking method) towards
the left, set at highest level (a higher level) until the
respective first window is reached again.
During usage, check everynow and then if the
Audiotherm is still set right or is initialised for
the desired cooking method, soft or turbo quick-
cooking. In case of doubt, switch o Audiotherm,
set and initialise again.
When the cooking time is over
(if acooking time has been set):
§ Single, repetitive beep is heard.
➔
Switch o stove.
➔
Stop beep, remove Audiotherm and switch o
Setting “P”
§ Suitable for aparticularly energy-saving prepara-
tion of dishes with shortquick-cooking time and
depressurising through slow cooling down, like
risotto, rice and many frozenvegetables (see
user manual of “Secuquick softline”).
§ On the Audiotherm, the setting “P” is found
between the positions “3:00” and “0:01”.
31
§ When the beep is heardand the symbol
“increase” flashest, the temperatureistoo low
(indicator in the first soft or turbo window).
29
➔
Set stove at highest/higher level, stop beep.
§ The display “0:00” flashes.
30
The setting “P” corresponds to acooking time of
“20 seconds”.
AMC_ADTH_EN.indd 16 21.04.15 11:34
To Next Page
Loading...
Need help?
General
