Amcrest A2 User Manual

8
Enter Password
Create a new admin password for your NVR. The password for your device should be between 8 and 32
characters. A combination of letters, numbers, and symbols are recommended when setting up your
password.
Note: Please do not use special symbols like ‘ ‘ ; : &
Once you have entered a new password for your device, confirm the password in the next field. A hint for
the password is optional but is recommended in case you forget the password. You can also disable or
enable the unlock pattern toggle switch as this feature is optional. Click Next.
Unlock Pattern
This is an optional security measure for your device. To set an unlock pattern, use your mouse to draw a
design that you will remember. Draw the pattern again to confirm. If you do not want to assign an unlock
pattern, you can click ‘Skip’ to skip this process.

Amcrest A2 Specifications

General

Brand	Amcrest
Model	A2
Category	DVR
Language	English