Show Message: This checkbox allows the user to enable the system to show an on-screen message
when an HDD abnormality occurs.
Buzzer: Check this box to enable a buzzer to be sound on your device if an event occurs.
Log: Check this box to enable a log of the abnormality to be retained into the system.
Send Email: This checkbox allows the user to enable the system to send an email when a motion
detection alarm is triggered.
To refresh the page, click the Refresh button. To Save the settings click the Save button.
Maintain
The Maintain menu allows the user to view system information, update, import and export
configuration settings, etc.
Log
This menu allows the user to view log information retained in the system. The system will automatically
retain logs of events which occur during normal operation.
Below is a description of the features in this menu:
Type: Use this dropdown menu to select a log type.
Start Time: The start time in which logged events will be displayed
End Time: The end time in which a logged event will be displayed.
Search: Run a query of logs based on the start and end time.
Go To: Go to a specific log in the query.
Details: Provides details of a selected log such as, the login group, IP address, user, time, etc.
Clear: Clears the query.
Backup: Used to download data from the query to a designated file path.
To view system logs, enter a start and end time for the log you wish to pull and select a log type from the
dropdown menu. Click Search. To download a copy of the log to your computer, click on Backup, select a
path for the text document.
System Info
This menu allows the user to view information about their system such as the current system and
firmware version, hard drive details, BPS, and hard drive health detection.
Version
The version tab provides details about the NVR such as the model, system version, and other basic
information related to the system.
To Next Page
Loading...
