Amcrest A2 User Manual

32
The storage path tab allows the user to designate a path for snapshots and videos to be downloaded.
This feature may not be available on all browsers.
Below is a screenshot of this menu:
Below is a description of the fields in this menu:
Snapshot Path – The designated storage path for all downloaded snapshots.
Record Path – The designated storage path for all downloaded recordings.
To set a storage path, click on the Browse button and select a storage path or folder in which snapshots
or recordings will be downloaded.
To revert to default settings, click the Default button. To confirm settings, click the Save button.
Camera Name
This screen is used to modify the channel names for a connected device. Each field supports a maximum
of 31 characters. To rename a camera, choose which channel you would like to modify and enter a name.
Once the name has been updated, click Save.
To revert to default settings, click the Default button near the bottom left-hand corner. Press the Refresh
button to refresh the interface. To confirm settings, click the Save button near the bottom right-hand
corner. Click the Back button to exit the interface.
Network
This menu controls all network related functions for the NVR and governs how the NVR interacts with a
connected network.
TCP/IP
TCP/IP stands for Transmission Control Protocol/Internet Protocol and it is the language/protocol that
allows communication between internet connected devices, whether on a local network, or a on the

Amcrest A2 Specifications

General

Brand	Amcrest
Model	A2
Category	DVR
Language	English