BIOS SETUP
MB740 User’s Manual 35
Video Off Method
This field defines the Video Off features. There are three options.
V/H SYNC + Blank Default setting, blank the screen and turn
off vertical and horizontal scanning.
DPMS Allows BIOS to control the video display.
Blank Screen Writes blanks to the video buffer.
Switch Function
The default setting is Break/Wake.
Modem Use IRQ
This field sets the IRQ used by the Modem. By default, the setting is 3.
Hot Key Function As
The default setting is Power Off.
HDD Off After
The default setting is Disabled.
Power Button Override
The default setting is Off. This field determines the state of the computer
after a power failure. If set to Off, the system will not boot when power
returns. If set to On, the system will restart when power returns.
Power State Resume Control
The default setting is Always Off.
PM Wake Up Events
Users can enable system events (IRQ, Ring Power Up, MACPME
Power Up, PCIPME Power Up, PS2KB Wakeup, PS2MS Wakeup,
Power up by Alarm) to wake up the system.
To Next Page
Loading...
Need help?
General
