AMD MD740 User Manual

BIOS SETUP
36 MB740 User’s Manual
PNP/PCI Configurations
This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Reset Configuration Data
Disabled
Menu Level
Resources Controlled By
Auto (ESCD)
IRQ Resources
Press Enter
PCI/VGA Palette Snoop
Disabled
Reset Configuration Data
This field allows you to determine whether to reset the configuration
data or not. The default value is Disabled. Select Enabled to reset
Extended System Configuration Data when you exit Setup if you have
installed a new add-on and the system reconfiguration has caused such a
serious conflict that the OS cannot boot.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
with the use of a PnP operating system such as Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly.
This field allows you to set whether or not MPEG ISA/VESA VGA
cards can work with PCI/VGA. When this field is enabled, a PCI/VGA
can work with an MPEG ISA/VESA VGA card. When this field is
disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.

AMD MD740 Specifications

General

Brand	AMD
Model	MD740
Category	Motherboard
Language	English