AMD MD740 - Page 60

APPENDIX
56 MB740 User’s Manual
{
unsigned char result;
Set_ITE8705_LD(0x05); //switch to logic device 7
result = inportb(ITE8705_IO_PORT) & 0x0F;
return (result);
}
//---------------------------------------------------------------------------
void ClrKbBuf(void)
{
while(kbhit())
{ getch(); }
}
//---------------------------------------------------------------------------

File name:ITE8705.CPP
//============================================================
// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT
// WARRANTY OF ANY
// KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED
// TO THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
// PARTICULAR
// PURPOSE.
//
//============================================================
#include "ITE8705.H"
#include <dos.h>
//============================================================
unsigned int ITE8705_BASE;
void Unlock_ITE8705 (void);
void Lock_ITE8705 (void);
//============================================================
unsigned int Init_ITE8705(void)
{
unsigned int result; //0=NA,1=ITE8705
ITE8705_BASE = 0x2E;
result = Get_ITE8705_Reg(0x21);
if (result == 0x05)
{
result = 1;
goto Init_Finish;
}
ITE8705_BASE = 0x4E;
result = Get_ITE8705_Reg(0x21);
if (result == 0x05)
{
result = 1;
goto Init_Finish;
}
ITE8705_BASE = 0x00;
result = 0;
Init_Finish:
return (result);
}
//============================================================
void Unlock_ITE8705 (void)
{
outportb(ITE8705_INDEX_PORT, ITE8705_UNLOCK1);