12
8.a.
Pump parts may vary.
ASSEMBLED HYGIENIKIT
for single pumping.
8.b.
ASSEMBLED HYGIENIKIT
for double pumping.
ATTACH the adapter cap(s)
by pressing it onto the top of
the flange(s) until you hear a
pop.
The tubing should still be
CONNECTED to the adapter
cap(s) and tubing adapter.
If you have taken these apart,
attach tubing to adapter cap(s)
and the tubing to the tubing
adapter.
7. 6.
4.
ATTACH and TIGHTEN the
bottle(s) or attach milk storage
bag(s).
5.
INSERT the diaphragm(s) into
the top of the flange.
It is important that the inside
of the diaphragm is completely
DRY to avoid moisture from
forming in the tubing.
To Next Page
Loading...
