13
5. INSPECTING BEFORE PUMPING
IMPORTANT:
Before using the Finesse™ Breast
Pump and HygieniKit system, check the parts for cracks,
chips, tears, or wear. They can affect the function of the kit.
If parts need replacing due to defects, please call your local
distributor or the location where you purchased the pump.
Do not use damaged parts. For a listing of distributors in your
country, please visit www.ameda.com.
6. OPERATING INSTRUCTIONS
6.1 Plug into Power Source
Choosing and checking your electrical source
AC POWER ADAPTER
WARNING: Use ONLY the
AC power adapter
recommended for the Finesse™
Breast Pump. AC power adapters
with Australia, United Kingdom or
Europe or other international plug
configurations are not intended for
use in the USA or Canada.
WARNING: Always inspect the AC power adapter for
damage such as kinking or twisting of cords or frayed or
exposed wires. If damaged, discontinue use immediately and
call customer service at
1-866-992-6332 (1-866-99-AMEDA).
1. If batteries are in pump base, REMOVE
batteries before using AC power adapter
plug.
2. PUSH small end of AC power adapter into
left side of the pump base as shown.
3. PLUG other end into AC outlet.
!
!
!
To Next Page
Loading...
