Need help?Do you have a question about the American Standard 2A6H8030A and is the answer not in the manual?
General| Brand | American Standard |
|---|---|
| Model Number | 2A6H8030A |
| Type | Air Conditioner |
| Tonnage | 2.5 Tons |
| Refrigerant Type | R-410A |
| Operating Voltage | 208/230 V |
| Phase | 1 |
| Sound Level (Outdoor) | 72 dB |
| Unit Weight (Outdoor) | 215 lbs |
| Compressor Type | Single Stage |
| Unit Dimensions (Outdoor) | 31.5 x 31.5 x 31.5 inches |
| Cooling Capacity | 30, 000 BTU/h |
Details on Evaporator Defrost Control Kits for cooling and heat pump units.
Information on compressor crankcase heater and hard start kits.
Guidance on using windshields for low ambient temperature operation.
Diagram and specifications for base pan mounting hole locations.
Covers clearances for single/multiple units in corners, walls, and on pads/rooftops.
Guidelines for clearances related to fences, barriers, and windshields.
Minimum working space requirements for electrical equipment per NEC.
Explains the function of liquid and gas refrigerant lines in the system.
Details maximum linear and vertical length limits for refrigerant piping.
To Next Page