Need help?Do you have a question about the American Standard 2A7A8060A and is the answer not in the manual?
General| Model | 2A7A8060A |
|---|---|
| Type | Air Conditioner |
| Cooling Capacity | 60, 000 BTU/H |
| SEER Rating | 18 |
| Phase | 1 |
| Refrigerant | R-410A |
| SEER | 18 |
| HSPF | Not Applicable |
| Refrigerant Type | R-410A |
| Operating Voltage | 208/230 V |
| Sound Level (Outdoor Unit) | 74 dB |
| Voltage | 208/230 |
| Tonnage | 5 Ton |
Details accessories needed for specific outdoor temperatures.
Information on EDC kits for cooling and heat pumps.
Mentions compressor crankcase heater and hard start kits.
Procedures for mounting and securing the unit base.
Diagram showing base pan mounting hole locations and dimensions.
Discusses airflow, service access, codes, and design temperatures.
Clearances for single units in a corner based on ambient temperature.
Clearances for multiple units in a corner based on ambient temperature.
Clearances for single units in a fenced corner based on ambient temp.
Clearances for a single unit next to one wall based on ambient temp.
Clearances for multiple units on a pad or rooftop.
Guidelines for fence construction and windshield requirements.
Details NEC requirements for service area working space around electrical equipment.
Table showing CFM for Allegiance/Heritage cooling and heat pump units.
Table listing dimensions (A, B, C) for Allegiance/Heritage units.
Explains liquid and gas lines and sets line length limitations.
Details the effects of line length on subcooling and oil return.
To Next Page