Need help?Do you have a question about the American Standard 2A6H8060A and is the answer not in the manual?
General| Model | 2A6H8060A |
|---|---|
| Cooling Capacity | 60, 000 BTU/h |
| Tonnage | 5 Ton |
| SEER Rating | 16 SEER |
| Refrigerant | R-410A |
| Voltage | 208/230V |
| Phase | 1 |
| Sound Level (Outdoor Unit) | 74 dB |
| Type | Air Conditioner |
| Compressor Type | Single Stage |
Specifies clearances for a single unit in a corner, considering ambient temperature and wall configurations.
Defines clearances for multiple units in a corner with adjacent walls, based on ambient temperature.
Outlines clearances for a single unit in a fenced corner, ensuring adequate airflow and service access.
Details clearances for multiple units in a fenced corner, considering ambient temperature and fence openings.
Specifies clearances for a single unit installed next to one wall, ensuring airflow and service access.
Provides clearance requirements for multiple units installed on a pad or rooftop with unobstructed top clearance.
Guidelines for fence height, air passage sizing, and material for maintaining unit clearances.
Information on windshield requirements for low ambient operation and protection from prevailing winds.
Specifies maximum linear and vertical lengths for gas and liquid refrigerant lines for dual compressor units.
Details the impact of refrigerant line lengths on subcooling and oil return during operation.
To Next Page