Ametek Dunkermotoren BG65Sx50 MI User Manual

BG65S MI
Motor Part No.
65Sx25
88566.05XXX
65Sx50
88566.06XXX
Instruction Manual
Motor with freely programmable
motion controller integrated
Betriebsanleitung
Motor mit integriertem frei
programmierbaren Motioncontroller
Dunkermotoren GmbH
Allmendstraße 11 · D-79848 Bonndorf/Schwarzwald
www.dunkermotoren.com · info@dunkermotoren.de
Phone +49 (0) 7703 930-0 · Fax +49 (0) 7703 930-210/212

Ametek Dunkermotoren BG65Sx50 MI Specifications

General

Brand	Ametek
Model	Dunkermotoren BG65Sx50 MI
Category	Engine
Language	English

Summary

General Description

3.1 Motor Series BG65S MI

Describes the brushless DC drive with integrated motion controller and CANbus interface.

3.2 Explanations of Terms Used

Safety Instructions

Technical Data and Accessories

5.1 Electrical Data

Details electrical specifications like voltage, power, and current.

5.2 Mechanical Data

Covers physical dimensions, operating temperatures, and protection ratings.

5.2.1 Load Diagram Output Shaft

Provides the load diagram for the output shaft based on speed.

5.3 Dimensions

Provides detailed mechanical drawings and dimensions of the motor.

5.4 Motor Specification

Lists specific performance parameters for different motor variants.

Protective Functions

7.1 Over-temperature Protection

Describes the motor's protection against overheating.

7.2 Under Voltage Cut-off (Logic)

Explains protection against low logic supply voltage.

7.3 Under Voltage Cut-off (Power)

Explains protection against low power supply voltage.

7.4 Over Voltage Cut-off (Logic)

Explains protection against high logic supply voltage.

7.5 Over Voltage Cut-off (Power Stage Supply)

Explains protection against high power supply voltage.

7.6 Over Current (I2t)

7.9 Overview of Protection Thresholds

Installation

8.1 Mechanical Installation

Guides mechanical mounting, fixing, and general setup of the drive.

8.2 Electrical Installation

Covers electrical connections and EMC requirements for the drive.

8.2.1 Electro-magnetic Compatibility

8.2.2 Ground Wire

8.2.3 Power- and Logic Supply

8.2.4 Pin Assignment

8.2.6 Connection via 15-pin Connector for Motor

8.2.7 Connection CAN Field Bus Connection

8.2.9 Electromagnetic Compatibility

8.2.10 Earthing

8.2.11 Schematic Circuit Power Supply