Ametek Dunkermotoren BG 75x25 - User Manual

BG 75
Motor Part No.
75x25 88575.070XX
75x50 88575.080XX
75x75 88575.090XX
mit Anbau 88710.XXXXX
Instruction Manual
BLDC motor with
EtherCAT Interface
Betriebsanleitung
Bürstenloser DC - Motor mit
EtherCAT Schnittstelle
Dunkermotoren GmbH | Allmendstraße 11 | D-79848 Bonndorf/ Schwarzwald
Phone +49 (0) 7703 930-0 | Fax +49 (0) 7703 930-210/ 212 | info@dunkermotoren.com

Ametek Dunkermotoren BG 75x25 Specifications

General

Brand	Ametek
Model	Dunkermotoren BG 75x25
Category	Engine
Language	English

Summary

2 Safety Instructions

2.1 General Safety Guidelines

Essential safety guidelines for handling and operating the drive.

2.2 Protective Function Overview

Details motor protection against overload, over-temp, and energy feedback.

3 Technical Data

3.1 Mechanical and Electrical Specifications

Details the motor's physical dimensions and electrical parameters.

3.2 Motor Operating Modes

Covers installation drawing, standard and CiA DS402 operating modes.

6 Installation Guide

6.1 Mechanical Installation

Instructions for physical mounting and connector handling.

6.2 Electrical Installation and EMC

Details wiring, grounding, connectors, and EMC compliance.

7 Commissioning Procedures

7.1 Preparation and Setup

Steps required before the initial startup of the system.

7.2 Status LEDs

Explains status LEDs for diagnostic purposes.

8 EtherCAT Master Configuration

8.1 General Configuration

Overview of EtherCAT network setup.

8.2 Beckhoff PLC Example

Demonstrates integration with a Beckhoff PLC.

9 Maintenance and Support

9.1 Maintenance and Disposal

Covers maintenance, removal from service, and disposal procedures.

9.2 Service & Support Contacts

Contact information for technical assistance and support.