To Next PageTo Next Page
Need help?Do you have a question about the Ametek dunkermotoren BG dCore Series and is the answer not in the manual?
General| Motor Type | Brushless DC Motor |
|---|---|
| Efficiency | Up to 90% |
| Commutation | Electronic |
| Housing Material | Aluminum |
| Control | Integrated |
| Communication | CANopen, RS485 |
| Protection Class | IP65 |
Explains responsibilities and warranty exclusions for product use and modifications.
Introduces hazard symbols and their meaning for risk avoidance.
Details hazard symbols indicating potential dangers and required actions.
Defines products as vendor parts for industrial machinery and equipment.
Lists forbidden applications, such as exceeding data limits or use in explosive areas.
Emphasizes using the product in impeccable condition and adhering to technical data.
Specifies that only qualified personnel should handle, install, and operate the products.
Covers safety precautions for various operational phases like transport and installation.
Provides guidelines for safe transport and storage of the product.
Covers safety precautions for electrical shock and short circuits during installation.
Addresses specific hazards like EMC and mechanical safety during operation.
Discusses measures to mitigate electromagnetic interference during operation.
Details the brushless motor construction, Hall sensors, and optional encoders.
Lists and describes various optional attachments like gearboxes and brakes.
Explains the Hall sensor output as open collector and pull-up resistor calculation.
Describes the integrated incremental encoder and its output signals.
Provides detailed technical specifications for the BGA 22 dCore motor series.
Presents detailed technical specifications for the BG 32 dCore motor series.
Lists technical specifications for the BG 42 dCore motor series.
Details technical specifications for the BG 62 dCore motor series.
Presents technical data for BG 65 dCore, including plug and control electronics settings.
Explains the components and information found on motor labels.
Outlines operating conditions like protection class, temperature, and humidity.
Covers mechanical installation steps, including mounting and alignment.
Details safety precautions and procedures for electrical connections.
Guides on installing the system to ensure electromagnetic compatibility.
Details the pin assignment and wire colours for the BGA 22 dCore wire version.
Explains the pin assignment for the BG 32 dCore using a 3-pin connector.
Explains the hybrid connector for motor winding and Hall sensor supply.
Details the hybrid connector for BG 66 dCore motors.
Describes connections for BG 45 SIMATIC MICRO-DRIVE with hybrid connectors.
Details connections for BG 65S SIMATIC MICRO-DRIVE with hybrid connectors.
Explains connections for BG 75 SIMATIC MICRO-DRIVE with 4-pin connectors.
Outlines connections for BG 95 SIMATIC MICRO-DRIVE with 6-pin connectors.
