DANGER
CAUTION
WARNING
ATTENTION
Danger- The danger symbol is used to indicate imminently
hazardous situations, locations, and conditions which, if not
avoided, WILL result in death, serious injury, and/or severe
property damage.
Caution- The caution symbol is used to indicate potentially
hazardous situations and conditions which, if not avoided, may
result in injury. Equipment damage may also occur.
Warning- The warning symbol is used to indicate potentially
hazardous situations and conditions which, if not avoided,
COULD result in serious injury or death. Severe property damage
COULD also occur.
Attention- The attention warning symbol is used to indicate
situations and conditions that can cause operator injury and/or
equipment damage.
Other warning symbols may appear along with the Danger and
Caution symbol and are used to specify special hazards. These
warnings describe areas where special care and/or procedures
are required to prevent serious injury and possible death.
Electrical Warnings- The electrical warning symbol is a lightning
bolt mark enclosed in a triangle. The electrical warning symbol is
used to indicate high voltage locations and conditions may cause
serious injury or death.
Explosion Warnings- The explosion warning symbol is an
explosion mark enclosed in a triangle. The explosion warning
symbol is used to indicate locations and conditions where molten,
exploding parts may cause serious injury or death if the proper
precautions are not observed.
Protective Earth (Ground)
Connection point for the neutral conductor on PERMANENTLY
INSTALLED EQUIPMENT
Earth Ground
To Next Page
Loading...
Need help?
General
