Do you have a question about the Ametek Sorensen XG 20-42 and is the answer not in the manual?
Model | XG 20-42 |
---|---|
Type | Programmable DC Power Supply |
Output Voltage | 0-20 V |
Output Current | 0-42 A |
Power Rating | 840 W |
Output Voltage Resolution | 1 mV |
Output Current Resolution | 1 mA |
Input Voltage | 100-240 VAC |
Input Frequency | 47-63 Hz |
Cooling | Forced air |
Protection | OVP, OCP, OTP |
Remote Sensing | Yes |
Parallel Operation | Yes, up to 4 units |
Series Operation | Yes, up to 2 units |
Line Regulation | 0.01% + 2mV |
Load Regulation | 0.01% + 2mV |
Ripple and Noise | <5 mVrms |
Interface | GPIB |
Efficiency | >85% |
Operating Temperature | 0°C to 50°C |
Storage Temperature | -40°C to 70°C |