Ametek Sorensen XG 33-50 User Manual

PROGRAMMABLE POWER
M370430-01 Rev F www.programmablepower.com
XG Family Programmable DC
Power Supply
Operating Manual
(firmware v 2.0 and higher)
670 Watts – 1700 Watts
Half Rack
Full Rack
6 V to 600 V Models:
6-110
6-220
6-220
8-100
8-187.5
8-200
12-70
12.5-120
12-140
20-42
20-76
20-84
33-25
30-50
33-50
40-21
40-38
40-42
60-14
60-25
60-28
80-10.5
80-19
80-21
100-8.5
100-15
100-17
150-5.6
150-10
150-11.2
300-2.8
300-5
300-5.6
600-1.4
600-2.6
600-2.8

Ametek Sorensen XG 33-50 Specifications

General

Brand	Ametek
Model	Sorensen XG 33-50
Category	Power Supply
Language	English

Summary

Installation Procedures for XG Power Supplies

Basic Setup Procedure

Provides a step-by-step summary of the basic setup process for the power supply.

Step 3: Connecting AC Input Power

Details the procedures for safely connecting AC input power to the XG power supply models.

Step 5: Performing Functional Tests

Outlines the functional tests required to verify power-on, voltage, and current mode operations.

Local Operation of XG Power Supplies

Configuring Settings from the Front Panel

Explains how to configure power supply settings using the front panel controls and menu system.

Alarms and Errors

Describes the various alarms and error conditions that can occur and their precedence.

Resetting the Power Supply

Analog Programming and Isolated Analog Programming

Remote Operation of XG Power Supplies

Status Reporting in SCPI

SCPI Error/Event Queue

Details the SCPI error/event queue, including querying for errors and their descriptions.

Communications Options for XG Power Supplies

Setting a Static IP Address through Ethernet, USB, Serial Interfaces

SYSTEM COMMANDS

Calibration and Troubleshooting

Main Voltage and Current Calibration Principle

Explains the principles of gain and offset errors in analog programming calibration.

Calibrating the Output Voltage

Provides procedures for performing gain and offset calibration on the output voltage.

Troubleshooting for Operators

Offers guidance for operators on identifying and resolving common power supply issues.