Hydraulic Fluid
Type T Series Pump Systems are only available delivered empty. You will still need to specify what uid type you are going to use (for example; FOV for Oil or FWV for Water).
Ordering a Pump System
Any Type T Series Pump System may be ordered with or without a reference indicator. The table below provides an explanation of the Pump System ordering
scheme when ordering a system without an indicator. For details on ordering the Pump Systems with an indicator, see the indicator datasheet.
Reference Indicator Reference Indicator Included Pump System
HPC500 Series ...HPC500 No ...-NONE System F (T-1) .............-FWB
System F (T-1/Viton) .......-FWV
System F (T-1/EPT) ........-FWE
System F (T-1/Oil) .........-FOB
System F (T-1/Oil/Viton) ...-FOV
System F (T-1/Oil/EPT) .....-FOE
Parts Included with Pump Systems for JOFRA Reference Indicators
System F
FWB
(T-1)
FWV
(T-1/Viton)
FWE
(T-1/EPT)
FOB
(T-1/Oil)
FOV
(T-1/Oil/Viton)
FOE
(T-1/Oil/EPT)
Part Number Description
T-134 15/16-20 Male to 1/4" NPT Female Adapter
T-135 15/16-20 Male to 1/2" NPT Female Adapter
T-786 1/4" NPT Male to 1/4" BSP Female Fitting
127400
*
1/4" NPT Male to 1/8" BSP Male Fitting
127401
*
1/4" BSP Female to 1/8" BSP Male Fitting
127402
*
1/8" Bonded Seals
60R120 1/4" Bonded Seals
404203
*
Test Leads; Red & Black, including clips
60I104 Pack Tape (1 roll)
124004 Shoulder Strap
124304 Aluminum Carrying Case
*
Included with HPC.
X
SAMPLE PART NUMBERS
HPC-NONE-FWB ..........System F pump system (for HPC500), for use with water.
HPC-NONE-FOE ...........System F pump system (for HPC500), for use with oil.
HPC500-700G-FOB ........System F pump system for use with oil with a 0.82 to 35 bar HPC500 included.
To Next Page
Loading...
Need help?
General
