Contents
Overview ............................................................. 1
Introduction ............................................................1
Accuracy ............................................................1
Care and Handling ...................................................1
Features and Parts Lists .................................................2
Parts Included with Type T Hydraulic Deadweight Testers...............2
Setup .................................................................. 3
Single Column Deadweight Tester Conguration .........................3
Dual Column Deadweight Tester Conguration ...........................6
Operation ............................................................ 9
Preparing to Generate Pressure ..........................................9
Priming................................................................10
Adding Weight Masses .................................................12
Calibrating a Device Under Test .........................................12
Maintenance and Replacement ............................... 15
Piston and Cylinder Assemblies .........................................15
The Optional Isolating Membrane.......................................18
Cleaning...............................................................20
Specifications ...................................................... 21
Pressure Range .....................................................21
Recommended Test Fluids...........................................21
Pressure Connections ...............................................21
Physical Specications ..............................................21
Support .............................................................. 22
Troubleshooting .......................................................22
Failure to Pump .....................................................22
Pump Does Not Hold Pressure .......................................24
Fitting Kits and Spare Parts .............................................26
Service Kits .........................................................26
Hoses ..............................................................26
Adapters ...........................................................26
Recommended Recertication Procedures ..............................26
Frequency of Recertication .........................................27
Certication Options for New and Used Deadweight Testers...........27
Appendices............................................................28
Appendix A: International Deadweight Testers and Weight Sets .......28
Appendix B: Assembly Drawings and Parts Lists.......................30
Contact Us.............................................................40
Returning product to AMETEK ..........................................40
Warranty ..............................................................40
To Next Page
Loading...
Need help?
General
