Need help?Do you have a question about the Ametek T Series and is the answer not in the manual?
General| Series | T Series |
|---|---|
| Manufacturer | Ametek |
| Category | Test Equipment |
| Storage Temperature | -20 to 70 °C |
| Communication Interface | RS-232, USB, Ethernet |
| Humidity | 5 to 95% non-condensing |
| Safety Standards | UL61010-1 |
| Cooling Method | Forced air |
Overview of Type T testers, accuracy specifications, and calibration.
Guidelines for safely handling and maintaining the tester's critical components.
Lists components for single/dual column models and associated carrying cases.
Steps to configure the tester for single-column deadweight testing.
Procedures for setting up the dual-column deadweight testing system.
Initial steps before pressure generation, including valve operations and pump handle.
Detailed procedure to prime the pump and ensure proper pressure building.
Instructions on calculating and applying weight masses to achieve specific test pressures.
Steps for performing calibration on a device using the deadweight tester.
Procedures for removing and installing the piston and cylinder assembly.
Details on the function and installation of the optional isolating membrane.
Guidelines for thoroughly cleaning critical tester components.
Covers pressure range, test fluids, connections, and physical dimensions.
Diagnosing and resolving issues related to the pump not building or holding pressure.
Information on available spare parts, recertification, and tester options.
Tables detailing tester models, weight sets, and pressure calculations.
Detailed assembly drawings and parts lists for various tester components.
Details the product warranty terms, conditions, and limitations.
To Next Page