18
Installation and ventilation
When installing this product we recommend
you seek the help of another individual. This
product may have some sharp edges. Please
take care and wear adequate PPE when
handling.
This appliance must never be installed close
to heat sources such as heating elements,
radiators, ovens and cookers nor installed in
damp places or direct sunlight.
Failure to provide adequate ventilation
can lead to increased running costs and
premature failure; it may also invalidate the
warranty provided with the product.
• The plug should be fully accessible at all times.
• Ensure ventilation openings are kept clear.
• Do not use a multi-plug adaptor in the socket to connect this
appliance alongside other appliances.
• Do not tilt the fridge beyond 45º.
• Do not exert excessive pressure on the appliance.
• Ensure that there is a gap of no less than 10cm above and to
the sides of the appliance to allow for ventilation. The clearance
between the sides and adjacent furniture must also allow the
doors to open fully. Note that a greater side gap will be required
if the appliance is to be positioned next to a wall to allow the
doors to open fully.
• A gap of 7cm should be allowed for ventilation between the rear
wall and the back of the appliance. There are plastic guides/
stoppers supplied with the appliance that should be fitted when
Fig. 6
Appliance dimensions
590
1820
540
To Next Page
Loading...
Need help?
General
