19
aligning the appliance with a wall.
Place the guide into the condenser
and turn it by 90° (Fig 9). The guide
will then lock into place. Take
extreme care not to damage the
condenser whilst doing this. These
guides will protect the condenser
and ensure a minimum air gap.
Electrical information
Warning! This appliance must be earthed.
The mains lead of this appliance has been fitted with a specially
earthed plug.
Important: Do not use the appliance without the fuse cover in
position. Should the fuse need to be replaced, it must be replaced
with a 13A fuse, ASTA approved to BS1362.
The plug must be used with a specially earthed socket of 13
amperes. If there is no such socket in your house, please have one
installed by an authorised electrician.
If in doubt regarding the electrical connection of this appliance,
consult a qualified electrician. Do not shorten the supply cable, the
appliance may require removal for servicing.
Fig. 7
To Next Page
Loading...
Need help?
General
