21
How to Use the Product
1. Cleanse your face
After washing your face, ensure it is
thoroughly dry. Remove any jewelry
worn on the face, ears, neck, and hands,
as well as contact lenses.
2. Prepare the product
Press the button once to check the battery
level. If the battery indicator is red, please
charge the device before use.
3. Apply the face mask
Take the mask out of its package. Place the
mask on your face with the lining paper
facing outward. Peel off the lining paper
and delicately press the mask onto your
face.
4. Switch on the Device
To turn on the device, press and hold the
red power button until you feel a
vibration. If this is your first time using
the device, we recommend that you start
at Level 1 and adjust the intensity
gradually by clicking the button.
5. Start stamping
Place the smart sensor of the device head
securely in the designated slot. Each
successful stamp will trigger a vibration
indicating a zone change.
6. Stamp sequentially
Stamp three times in a specific order,
avoiding repeating stamping on the same
area more than three times in a row. The
mask should be worn for 10-15 minutes
following stamping.
To Next Page
Loading...