Amiro U1 - Page 36

33
FAQ
Possible causes
Solutions
FAQ
Possible causes
Solutions
Feeling a
tingling
sensation on
the skin
Device not properly
fitted against the skin
Ensure the device is in proper
contact with the skin
Sensation is too
mild
Gliding too fast
Decrease the gliding speed and
make sure the device glides
smoothly and evenly.
The skin has good
tolerance
Skin and nerve sensitivity to electric
current varies among individuals.
It’s a normal phenomenon.
Unlock higher energy levels using
Amiro’s WeChat Mini-Program
Choosing the wrong
level and mode
Switch to a gentler level. Start with
Level 1 to build tolerance
Double-click to switch to Gentle
Mode for a softer experience
Deactivate the microcurrent using
Amiro’s app
Skin discomfort
Redness
Ultrasound is used in this procedure
to generate warmth beneath the skin.
After the treatment, apply a mask for
10-15 minutes. There will be a
temporary recovery period. Seek
medical attention promptly if the
discomfort persists or does not
improve.
Sensation is
too mild
The intensity selected
is too low
Switch to higher intensity levels
Insufficient
gel/essence
Increase the gel/essence amount to
reduce resistance
Skin dryness
Apply sunscreen and use hydrating
skincare products
The mask dries out
Apply a fresh one
Energy box
detached
Dropped, caused
damage.
Please refer to the instructions on
page 32 for installing the energy
box. If it fails to operate correctly,
kindly reach out to customer service
for repair or replacement.