Ammann APF 1033 - Vibration and Noise Specifications; Optional Equipment and Applicable Standards

5. Vi bra tion
Vi bra tion force 10.5 kN
Vi bra tion fre quency 100 Hz
6. Work ing sur face
Work ing sur face 0.11 m² (1.184 ft
2
)
7. Spec. sur face pres sure
Spec. sur face pres sure 9.3 N/cm
2
(13.488 psi)
8. Op tional equip ment
Wa ter tank 5 l (1.32 US gal)
9. Noise and Vi bra tion data
The fol low ing noise and vi bra tion data ac cord ing to EC Ma chin ery Di rec tive in the ver sion (2006/42/EC), was de ter mined, tak ing into ac count the
fol low ing stan dards and di rec tives. In op er a tional use, val ues can de vi ate de pend ing on the pre vail ing con di tions.
9.1 Noise data
1)
The noise data spec i fied in Ap pen dix 1, sub-clause 1.7.4.u of the EC Ma chin ery Di rec tive is for:
the sound pres sure level at the op er a tor
place is L
PA
89 dB
Mea sured sound power level L
WA,m
102 dB
Guaranted sound power level L
WA,g
105 dB
The noise val ues were de ter mined, tak ing into ac count the fol low ing di rec tives and stan dards:
Di rec tive 2000/14/EC / EN ISO 3744 / EN 500-4
9.2 Vi bra tion data
Hand/arm vi bra tion val ues ac cord ing to Ap pen dix 1, sub-clause 3.6.3.1 of the EC Ma chin ery Di rec tive:
To tal vi bra tion value of the ac cel er a tion a
hv
8.9 m/s
2
Un cer tainty K 1.0 m/s
2
The ac cel er a tion value was de ter mined, tak ing into ac count the fol low ing di rec tives and stan dards:
EN 500-4 / DIN EN ISO 5349
2. Tech ni cal Data
27
1)
Since the per mis si ble noise rat ing level of 85 dB(A) can be ex ceeded with this ma chine, the op er a tor must wear suit able hear ing pro tec tion.