Ammann APF 1033 User Manual

3.3 Op er a tion the en gine
3.3.1 Start ing the en gine
•
Turn the fuel valve (1) to «ON».
•
Push the choke le ver (2) to «CLOSE».
•
Set throt tle le ver (3) to full throt tle.
•
Set the en gine switch (4) to «ON».
•
Pull the starter han dle (5) slightly un til re sis tance is no tice -
able, then pull firmly.
3. Ope ra ti on
30
Attention
Do not al low the starter han dle (5) to spring back
against the en gine. Move the start ing ca ble back
into its ini tial po si tion man u ally to pre vent the
starter be ing dam aged.
Do not use the choke when the en gine is warm or
at high out side tempertures.

Ammann APF 1033 Specifications

General

Brand	Ammann
Model	APF 1033
Category	Power Tool
Language	English