Ammann APF 1033 - Engine Warm-up and Shutdown Procedures

3.3.2 Af ter the en gi ne has start ed:
•
Set the throtte le ver to idling.
•
Al low the en gine to warm up for 1 to 2 min utes.
•
Set the choke le ver (2) dur ing the warm ing up phase to
«OPEN».
3.3.3 Switch ing off the en gine
•
Set the throt tle le ver (3) to «min.».
•
Turn the en gine switch (4) to «OFF».
•
Set the fuel valve (1) to «OFF».
Important
In case of emer gen cies, the en gine switch should be
turned to «OFF» to switch off the en gine.
3. Ope ra ti on
31