5.1 Be fore tow ing
Be fore tow ing, me chan i cally re lease the lock ing brake in the
back roller:
• Un screw the lock ing screw (1).
• Push the screws (2) to com press the springs (3).
• Tighten al ter na tively and pro gres sively the 2 screws (2) un til
they come into con tract (approx. 2 turns of screw).
• Re lease the by pass-screw (4) by 2-3 turns.
5.2 Tow ing
In or der to tow the ma chine, the means of at tach ment should be
at tached to the front or rearrings in the arms (Fig.).
5. To wing
61
Ap pro pri ate means of at tach ment should al ways
be used when tow ing.
Max i mum tow ing speed: 0,5 km/h
Max i mum tow ing dis tance: 300 m
To Next Page
Loading...