6.6 Main tain ing the Yanmar en gine
This op er at ing man ual only shows daily en gine main te -
nance. Fol low the en gine op er at ing man ual and the main te -
nance in struc tions and in ter vals it pro vides.
6.6.1 Over view
1 Air fil ter
2 Fuel dis charge
3 Oil dip stick
4 Oil drain bolt
5 Oil fil ter
6 Fuel filler port
6.6.2 Add ing fuel
• Park the ma chine on a firm, even sur face.
• Turn off the en gine.
• Clean the area around the fuel filler port (1).
• Open the fuel filler port and vi su ally check the fuel level.
• Add fuel, if nec es sary.
• Any die sel fuel is suit able if it meets the fol low ing spec i fi ca -
tions:
Die sel fuel spec i fi ca tion Coun try
ASTM D975
No. 1D S15, S500
No. 2D S15, S500
USA
EN590:96 Eu ro pean Un ion
ISO 8217 DMX In ter na tional
BS 2869-A1 oder A2 United King dom
JIS K2204 Gra de No. 2 Ja pan
KSM-2610 Ko rea
GB252 China
• Tighten the fuel cap (2) by hand.
6. Main te nance
69
Die sel fuel is ex tremely flam ma ble and ex plo sive
un der some cir cum stances.
Fill the tank only with the en gine off.
No open flame.
No smok ing.
Do not fill the tank in en closed spaces.
Do not in hale fuel fumes.
Do not spill fuel. Cap ture es cap ing fuel - do not let
it seep into the ground.
To Next Page
Loading...
General