6.5.3 Check ing the en gine oil level
• Park the ma chine hor i zon tally.
• Stop the en gi ne.
• Clean the area around the dip stick (2).
• Draw out dip stick;
• wipe off with clean, lint-free cloth and in sert all way.
• Draw out dip stick again and check oil level.
• If nec es sary, top up oil level to up per mark ing on dip stick.
• Check o-ring on dip stick and re place if nec es sary.
• Al low the en gine to run for ap prox i mately 1 min ute.
• Check oil level again with en gine switched off.
Col lect old oil and dis pose of it in an en vi ron ment
friendly man ner.
Do not per mit oil to run onto the floor into the
drains.
Im me di ately re place dam aged seals.
6. Main ten an ce
66
To Next Page
Loading...