Ammann ARX 12 - General transport information

138 ARX 1
1201281 A | 24.07.2013
12.1 General transport information
12.1.1 ARX 1: Shipping weights and dimensions
Tab. 12-1 ARX 1: Shipping weight and dimensions
* The second roller goes under the ROPS of the roller in front
12.1.2 Joint protection
Blocking
the joint
protection
1 Release the lower part of the joint protection (1).
1.1 First, remove the compression spring (2) and then the lock bolt (3).
2 Carefully turn the roller steering wheel until the joint protection comes in line
with the opposite loop.
NOTE You must start the roller to be able to move the steering wheel.
3 Hook the joint protection into place.
4 Secure the joint protection with the lock bolt (3).
ARX 12 ARX 16 ARX 20 ARX 16 K
Shipping weight (kg) 1535 1580 1630 1520
Shipping weight from the factory (kg) 1350 1395 1440 1330
Dimensions: LxWxH
ROPS folded up (cm)
222x87x240 222x95x240 222x105x240 222x95x240
Dimensions: LxWxH
Truck transport on LS/AB & RG (cm)
233x87x173 233x95x173 233x105x173 233x95x173
Dimensions: LxWxH
Container dimensions* (cm)
221x87x184 221x95x184 221x105x184 221x95x184
DANGER
Risk of crushing through presence in the pivoting area
(danger zone)!
• The articulated joint lock (joint protection) must be fitted before
lifting the roller for transport.
!
DANGER
Risk of crushing through presence in the pivoting area
(danger zone)!
• As soon as the roller is aligned, shut if off again.
!