Defects in air-conditioning system
Always call Service for repairs!
Defect Causes
The unit
doesn‘t
cool
check compressor belt
check evaporator fan - NG - check fuses F7 in
the fuse box - see Driver‘s Manual
check coolant level in inspection hole of the de-
hydrator lter - leak (bubbles, fogging up, etc.)
check electromagnetic latch, wi th engine
running wi th A/C on - the latch doesn‘t react
(no click in compressor )
1. faulty fuse F7,
2. faulty thermostat,
3. faulty pressure fuse.
Replacing (tightening) the belt
Loosen bolts 16, 17 and belt 13 (remove) by swinging compres-
sor 12 in (-) direction. Tighten using suitable lever by swinging
the compressor in (+) direction.
To Next Page
Loading...
