AMMCO 3000 - User Manual

1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688-6359 Manual Part No.: 911005 51
HENNESSY INDUSTRIES INC. Manufacturer of AMMCO
®
, COATS
®
and BADA
®
Automotive Service Equipment and Tools. Revision: 10/12
3000, 4000,
4100, 7500
Drum & Disc
Brake Lathes
®
Installation Instructions
Operating Instructions
Safety Instructions
Maintenance Instructions
READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for
ease of reference by supervisors and operators.

Summary

Definitions of Hazard Levels

Owners Responsibility

Details owner's duties for safe machine operation and maintenance according to regulations.

Safety Notices and Decals

Cautions and Dangers

IMPORTANT SAFETY INSTRUCTIONS

Basic Operation

Reconditioning Brake Drums

Mounting Drums

Guide on how to mount brake drums onto the arbor using adapters, cones, and spacers.

Reconditioning Disc Brake Rotors

Twin Cutters

Introduces the twin cutter tool for simultaneously reconditioning both rotor surfaces.

Model 6950 Twin Cutter - 4000 & 7500

Specific mounting instructions for the Model 6950 twin cutter on 4000 & 7500 lathes.

Rotor Mounting

Set Up and Reconditioning Rotors

Model 7900 Twin Cutter - 4100

Installation

Preparation

Initial rotor inspection and thickness measurement before reconditioning.

Rotor Mounting

Set Up and Reconditioning Rotors

Detailed procedure for setting up and reconditioning disc brake rotors using the twin cutter.

Maintenance and Service

Oiling

Care of Arbors and Adapters

Shear Gear Replacement

AMMCO 3000 Specifications

General

Brand	AMMCO
Model	3000
Category	Lathe
Language	English